OVAL

  RECTANGULAR

  ROUND/SPIRAL

  DOUBLE WALL

  SPECIAL PRODUCTS

  TIE RODS


HOME    |    FORMS/SUBMITTALS    |    ABOUT US    |    CONTACT US

TIE RODS
-Decrease Tie Rod labor costs by as much as 75%!
-Decrease total Tie Rod Reinforcement costs by as much as 50%!
-Eco Tie Rods are stocked for even duct sizes, 10” through 36”
-Odd sizes, or sizes over 36”, are available by special order.
Finished, ready to install Eco Tie Rods are less expensive than conduit type reinforcements or transverse angle reinforcements. No more cutting and deburring; no more scrap conduit; one less operation!

Eco Tie Rods are stronger than conduit tie rods! Solid steel, from end to end. No more worries about conduit kinking or conduit inserts failing over time.

Eco Tie Rods are less labor intensive to install into ductwork than conduit type reinforcements.
Eco Tie Rods are a one-man operation: Pop them in, Zip on the nuts, and the system is complete.

Eco Tie rods are a SMACNA approved reinforcement.

Eco Tie Rods reduce the need for expensive and time consuming transverse angle or Z-bar reinforcements!

Eco Tie Rods are made from solid steel, zinc plated 3/8” threaded rod. The inner flange nut is permanently crimped onto the rod, leaving 5/8” to ‘pop’ through the duct wall.

As the rods are ‘popped’ into holes in the duct, the rubber O-Ring is sandwiched between the inner flange and duct wall to create an air tight, water tight seal.

To complete the assembly, just ‘zip’ on threaded flange nuts from the outside.